PTFE Membrane Encased & Supported by All Polypropylene Construction

q Tech-Flow Series Cartridges Product Line Is Constructed of GORE-TEX Expanded Polytetrafluoro-ethylene (ePTFE) Membrane Encased And Supported by All Polypropylene Materials.

q A Broad Range of Liquid And Air Filtration Application.

q A Clean, Non-Shedding Surface Broadest Range of Pore Sizes Available.

q 100 Percent Integrity Tested And Low Extractable.

q Manufactured in a Clean Room Environment (Class 10,000).

q All Materials Are FDA Listed for Contact With Food And Beverage.

Retention Ratings
q 0.05, 0.1, 0.2, 0.45, 1um (Absolute)
Dimensions
Length	q 4" to 40" (101.6mm to 1016mm)
Outer Diameter	q 68mm
Materials of Construction
Filter Media	q Expanded Polytetrafluoroethylene (ePTFE) Membrane
Core, Cage	q Polypropylene (Standard), High Density Polyethylene
Support Layers	q Polypropylene (Standard), Polyethylene Micro fiber
O-rings/Gaskets	q EPDM, Viton, Silicon, Teflon Encapsulated Type (BSI Registered)
Operating Conditions
Max. Operating Temperature		q 90°C
Max. Forward Differential Pressure		q 2.1 bar @ 90°C q 4.8 bar @ 25°C

Sterilization

q In situ steam or autoclave to 120°C (30 minute cycles) for a maximum accumulated exposure of 50 hours at Max. differential pressure 15psi(1.0bar). Alternatively, the Tech-Flow may be sanitized with compatible chemical agent.

TEF Product Name	0.2- Retention Rating	10- Cartridge Length	P- Material of center core	3 End Configurations	E Materials of O-rings/gaskets
Tech-Flow	0.05, 0.1, 0.2, 0.45, 1um Absolute	4", 10", 20", 30", 40"	P = Polypropylene PE = High Density Polyethylene	No Symbol= Double open end 3 = SOE flat closed end, External 222 O-rings 8 = SOE fin end, external 222 O-rings 7 = SOE fin end, external 226 O-rings	E = EPDM V = Viton S = Silicon F = Teflon Encapsulated Type