PES Membrane Cartridges for Micro Electronics Gas Filtration

q       High Flow Rates And Throughputs Due to a Highly Asymmetric Pore Structure.

q       Provide The Ultra-Micro Filtration for Gas Application.

q       100 Percent Integrity Tested and Pre-flushed.

q       All Polypropylene Parts, Polypropylene Support Layer. With Thermal Welding Minimize Extractables.

q       Manufactured in a Clean Room Environment (Class 10,000).

q       All Materials Are FDA Listed for Contact With Food And Beverages.

q       Double Skin on An Open Anisotropic Pore Structure. The High Asymmetrical Pore Structure of Our Membrane Offers a High Dirt Loading Capacity, Increasing The Filtration Performance to Give Higher Throughputs And Higher Flow Rates Than Symmetrical Membrane.

 

 

 

 


Retention Ratings

q       0.004, 0.01, 0.02um for Gas

Dimensions

Length

q       4" to 40" (101.6mm to 1016mm)

Outer Diameter

q       68mm

Materials of Construction

Filter Media

q       Hydrophilic Polyethersulfone Membrane

Core, Cage

q       Polypropylene

Support Layers

q       Polypropylene Microfiber

O-rings/Gaskets

q       EPDM, Viton, Silicon, Teflon Encapsulated Type (BSI Registered)

Operating Conditions

Max. Operating Temperature

q       80°C

Max. Forward Differential Pressure

q       4.1 bar @ 25°C

 

 

Sterilization

q       In situ steam or autoclave to 120°C (30 minute cycles) for a maximum accumulated exposure of 10 hours at Max. differential pressure 7psi(0.5bar). Alternatively, the Micro-Flow G may be sanitized with compatible chemical agent.

 

 

 

 

 


MFN

Product

Name

020-

Retention

Rating

10-

Cartridge

Length

3

End

Configurations

E

Materials of

O-rings/gaskets

Micro-Flow

004=0.004 um

010=0.01 um

020=0.02 um

For Gas

4",

10",

20",

30",

40"

No Symbol= Double open end

 

3 = SOE flat closed end, External 222 O-rings

 

8 = SOE fin end,

external 222 O-rings

 

7 = SOE fin end,

external 226 O-rings

 

E = EPDM

V = Viton

S = Silicon

F = Teflon

Encapsulated Type